top of page
TOOLS AND FENCE ACCESSORIES
Drill Chuck
Drill chuck for #G66604 Screw-In Ring Insulators.
∆ WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
G71300
∆ WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
G71300
Strainer Handle
Spring loaded ratchet strainer handle for quick adjustment of wire strainers (fits most varieties of ratchet strainers). Self-ratcheting makes it easy and fast to use. Gold-passivated.
G69530
G69530
3-Hole Wire Twisting Tool
Designed for twisting high tensile wire, making it ideal for installing clips on posts and droppers. Galvanized for long life.
G523004
G523004
Ratchet Wire Tightening Tool
In line wire tightener handle with super smooth ratchet action, to be used with Gallagher in-line wire strainers (G64304).
Fencing Pliers and Wire Cutter
Specifically designed for cutting, stripping and bending electric fence wire with minimum wire damage.
∆ WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
G52200
∆ WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
G52200
2 Groove Wire Splice Tool
2 Groove, robust, tool for crimping wire joiners and splicing wire.
A609A
A609A
4 Groove Wire Splice Tool
20” Long 4-groove, robust tool for crimping wire joiners and splicing wire.
A609
A609
A644.jpg
HD Spinning Jenny
Heavy duty Spinning Jenny accommodates all standard wire sizes. Adjustable break keeps wire from overwinding.
A309
A309
Payout Spinner for Wooden Spool
A necessity for building permanent fence. The adjustable break keeps wire from overwinding and it attaches to a 2" receiver.
A308
A308
Spinning Jenny
Accommodates up to a 100 lb. roll of wire.
A305
A305
KEYHOLE BRACE
Easy and safe way to assemble drill stem H-braces and corner braces without the need of a welder. The Keyhole Brace System allows one person to drive and assemble a full corner in under thirty minutes. A two person team can fully set posts, cut rails, and wire a corner in close to 10-15 minutes. A simple H brace can be done in 5 minutes.
Patent # US 2018-0238076
See video under How To: Bracing
Patent # US 2018-0238076
See video under How To: Bracing
SPEED BRACE
Includes: 1 Gripple and 1-16 ft cable
Cable: 5/32" x 16'
Breaking strength 1320 lbs
Manufactured by Gripple
Installation
Pass the loop around the lower end post. Slide the cable end through it.
Slide Gripple over the cable.
Pass the end around the top of the brace post and back through Gripple.
Use the Gripple Tensioning Tool and it's done.
See Video under How To: Bracing
Cable: 5/32" x 16'
Breaking strength 1320 lbs
Manufactured by Gripple
Installation
Pass the loop around the lower end post. Slide the cable end through it.
Slide Gripple over the cable.
Pass the end around the top of the brace post and back through Gripple.
Use the Gripple Tensioning Tool and it's done.
See Video under How To: Bracing
GATE WINCH
For those long, hard-to-close barbed wire gates.
Has handle on both sides of gate.
Easy to operate ratchet holding mechanism.
Can be padlocked.
350 lb test chain
2 lag bolts for installation included (or can be welded)
Has handle on both sides of gate.
Easy to operate ratchet holding mechanism.
Can be padlocked.
350 lb test chain
2 lag bolts for installation included (or can be welded)
ULTRA-CRIMP TOOL
Built using the highest quality alloys, the Ultra-Crimp Tool will cut, strip coating, pull fence staples, and splice the most common wire used in the ranching business today. The Ultra-Crimp Tool has a 2-year warranty.
STRETCHER BARS
High-quality Stretcher Bars with wedges. Works in conjunction with Stretcher Bar Pullers.
Used to hold woven wire for tensioning.
Wedges are placed vertically on the bar.
Different sizes are available.
Compatible with most mesh, hinged, and ring joint woven wire.
Prevents slippage during installation.
Used to hold woven wire for tensioning.
Wedges are placed vertically on the bar.
Different sizes are available.
Compatible with most mesh, hinged, and ring joint woven wire.
Prevents slippage during installation.
STRETCHER BAR PULLER
Our Stretcher Bar Puller has a 19’ chain, hook type for use with Stretcher Bars for tensioning Fixed Knot and Stiff Stay wire fence.
You will need a set of 2 Stretcher Bar Pullers to pull the shorter stretcher bars and a set of 3 to pull 84” and longers bars. The Stretcher Bar Puller has a one-year warranty.
You will need a set of 2 Stretcher Bar Pullers to pull the shorter stretcher bars and a set of 3 to pull 84” and longers bars. The Stretcher Bar Puller has a one-year warranty.
1 3/4" BARBED STAPLES
For affixing fence wire to wooden posts.
Cordless powered fencing guns.
Double barbed 1 ¾”
8 GA Staples
Extra-sharp points.
Deep barbs that will not back out of the post.
Corrosion-resistant.
2#, 10# & 40# buckets
Cordless powered fencing guns.
Double barbed 1 ¾”
8 GA Staples
Extra-sharp points.
Deep barbs that will not back out of the post.
Corrosion-resistant.
2#, 10# & 40# buckets
SPLICING SLEEVES
Splicing Crimp Sleeves are designed to join different types of wire sizes. Made of all non-corrosive material that will not rust your wire the Splicing Sleeves are fast and easy to work with and will exceed the breaking strength of the wires.
Used for joining different types of wire sizes.
Made of all non-corrosive material.
-Barbed wire crimp sleeves.
-12.5 GA – 16 GA Crimp sleeves.
-8 GA – 10 GA Crimp sleeves.
Water-resistant grit adhesive for all-weather applications.
Corrosion-resistant, will not rust the wire.
Easy to handle and use.
Used for joining different types of wire sizes.
Made of all non-corrosive material.
-Barbed wire crimp sleeves.
-12.5 GA – 16 GA Crimp sleeves.
-8 GA – 10 GA Crimp sleeves.
Water-resistant grit adhesive for all-weather applications.
Corrosion-resistant, will not rust the wire.
Easy to handle and use.
GRIPPLE JOINING GRIPS
The Joining Grips significantly reduces the amount of time and labor needed to install and maintain your fence. Each Joining Grip is fitted with a ceramic roller mechanism that allows movement in one direction only, resulting in the ability to always tension the wire.
Patching and tensioning of all types of wire fencing.
Fitted with a ceramic roller mechanism that allows movement in one direction only.
Excellent corrosion resistance to sprays and fertilizers.
Reduces the amount of time and labor needed to install and maintain a fence.
The high-performance, engineering-grade ceramics provide a secure grip on all types of wire.
Patching and tensioning of all types of wire fencing.
Fitted with a ceramic roller mechanism that allows movement in one direction only.
Excellent corrosion resistance to sprays and fertilizers.
Reduces the amount of time and labor needed to install and maintain a fence.
The high-performance, engineering-grade ceramics provide a secure grip on all types of wire.
DRILL CHUCK
The machined Drill Chuck performs the tying function for Post Clips and Pipe Clips. When the tails of the Clips are put into the Drill Chuck, the drill twists the tails securely.
Used for affixing Pipe Post and T-Post Clips.
9 GA Drill Chuck.
Facilitates the installation of Clips.
Easy to handle and use.
Used for affixing Pipe Post and T-Post Clips.
9 GA Drill Chuck.
Facilitates the installation of Clips.
Easy to handle and use.
T-POST CLIP
The T-Post Clips provide a powerful attachment of fence wire to a post. When the tails of the Clips are put into the Drill Chuck, the drill twists the tails securely. All clips meet Class 3 standards for rust protection.
Used to keep fence wire firmly fastened to a T-Post.
Class 3 zinc protected.
T-Post size is 1 1/3″.
Powerful attachment of fence wire to a post.
Easy to handle and use.
Corrosion-resistant.
Used to keep fence wire firmly fastened to a T-Post.
Class 3 zinc protected.
T-Post size is 1 1/3″.
Powerful attachment of fence wire to a post.
Easy to handle and use.
Corrosion-resistant.
POST CLIPS
The Pipe Post Clips provide a powerful attachment of fence wire to a post. When the tails of the Clips are put into the Drill Chuck, the drill twists the tails securely. All clips meet Class 3 standards for rust protection.
Used to keep fence wire firmly fastened to a Pipe
Class 3 zinc protected.
Pipe Post Clips are size-specific ranging from 1 5/8″ to 4 1/2″.
Powerful attachment of fence wire to a post.
Easy to handle and use.
Corrosion-resistant.
Used to keep fence wire firmly fastened to a Pipe
Class 3 zinc protected.
Pipe Post Clips are size-specific ranging from 1 5/8″ to 4 1/2″.
Powerful attachment of fence wire to a post.
Easy to handle and use.
Corrosion-resistant.
BRACE PIN
Made of galvanized steel are a strong and reliable component when building a brace. Brace Pins are used to hold horizontal wood brace beams.
Help holding horizontal wood brace beams.
Made of hot dip galvanized steel.
1/2″ diameter.
4″ or 10″ lengths.
Helps reduce the time of a brace building.
Help holding horizontal wood brace beams.
Made of hot dip galvanized steel.
1/2″ diameter.
4″ or 10″ lengths.
Helps reduce the time of a brace building.
RING FASTENER
GRIPPLE TENSIONING TOOL
The Tensioning Tool not only tensions wire but regulates the load applied, delivering consistent results every time and maximizing the life of the wire.
Ideal for wire fence tensioning and wire trellising tensioning.
Lightweight and compact design.
Designed with an in-built gauge.
Ensures consistent tension every time, optimizing the life of the wire.
Gear driven handle provides a 6:1 mechanical advantage, allowing tensioning with minimal effort.
Works on all tensioners up to 1/4″ diameter wire.
Ideal for wire fence tensioning and wire trellising tensioning.
Lightweight and compact design.
Designed with an in-built gauge.
Ensures consistent tension every time, optimizing the life of the wire.
Gear driven handle provides a 6:1 mechanical advantage, allowing tensioning with minimal effort.
Works on all tensioners up to 1/4″ diameter wire.
bottom of page